language
GCC Approved
Testing support for products intended for major Gulf markets and regional conformity pathways.
LED Modules Testing Lab in UAE
LED Modules Testing Laboratory
Trusted Testing for Safer LED Modules
METS Laboratory LLC provides accredited LED module testing for safety, photometric performance, environmental reliability and regulatory compliance across the UAE and GCC markets.
SafetyElectrical, thermal and mechanical evaluation
PerformanceFlux, efficacy, CCT, CRI and distribution
ComplianceMOIAT, ADQCC, G Mark and GCC support
Specialist Lighting Evaluation
From Module Design to Regional Market Readiness
LED modules are central to modern residential, commercial, architectural and industrial lighting. Their safety depends on careful control of wiring, insulation, thermal behaviour, materials and operating stability.
METS Laboratory LLC evaluates these critical areas through controlled testing, helping manufacturers and importers demonstrate compliance with local, regional and international requirements.
task_altAccredited test reports for regulatory submissions
task_altTechnical assessment for constant voltage and constant current modules
task_altSafety, photometric and environmental evaluation
task_altPractical guidance for UAE and GCC market entry
Accreditations and Approvals
Reports Recognised Across Key Regulatory Channels
Our laboratory credentials support efficient conformity assessment and help reduce delays during product registration.
workspace_premium
GAC Accredited
Laboratory competence validated through Gulf Accreditation Center requirements.
account_balance
MOIAT Approved
Technical testing support for ECAS, EQM and applicable UAE product registration routes.
verified_user
ADQCC Approved
Testing evidence aligned with applicable Abu Dhabi quality and conformity requirements.
Core Testing Capabilities
Comprehensive Evaluation of LED Module Safety and Performance
The test programme can be adapted to module construction, operating method, intended luminaire and target certification pathway.
electric_bolt
IEC 62031:2018 Safety
General and safety evaluation for LED modules used in general lighting applications.
- check_circleMarking and construction checks
- check_circleTerminals and internal wiring
- check_circleProtective earthing provisions
- check_circleMoisture and insulation resistance
- check_circleEndurance and fault condition testing
light_mode
Photometric Performance
Optical measurements that verify output, colour quality, efficiency and light distribution.
- check_circleTotal luminous flux
- check_circleLuminous efficacy
- check_circleCorrelated colour temperature
- check_circleColour rendering index
- check_circleSpatial light distribution
device_thermostat
Environmental and Safety Limits
Stress testing to assess thermal stability, fire behaviour and material safety.
- check_circleResistance to heat and fire
- check_circleTracking and creepage distances
- check_circleThermal management analysis
- check_circleFlammability and glow wire checks
- check_circlePhotobiological optical hazard review
Understanding IEC 62031:2018
Safety Requirements Built Around Real Operating Risks
IEC 62031:2018 addresses LED modules operating under constant voltage, constant current or constant power. Testing examines how modules respond during normal operation, foreseeable misuse and simulated fault conditions.
cable
Mechanical and Wiring Integrity
Construction, terminals and wiring are assessed for secure assembly and safe integration into luminaires.
shield
Insulation and Electric Shock Protection
Insulation systems are checked to prevent current from reaching accessible conductive parts.
local_fire_department
Heat and Fire Behaviour
Materials and assemblies are evaluated under elevated temperature and abnormal operating conditions.
Inside the Testing Laboratory
Controlled Testing Across Electrical, Thermal and Material Boundaries
LED modules are evaluated through a structured protocol that links safety risks with measurable laboratory evidence.
Market Access Support
Simplifying LED Module Certification Across the GCC
Accredited testing provides the technical foundation needed by authorities and certification bodies. METS Laboratory LLC helps organise the evidence required for regional product registration and conformity pathways.
workspace_premium
G Mark Support
Accredited reports that support Gulf Conformity Mark assessment for applicable electrical products.
account_balance
MOIAT and ECAS
Technical files and testing support for UAE product conformity and registration requirements.
location_city
ADQCC Compliance
Testing support for applicable Abu Dhabi quality and conformity programmes.
public
GCC Distribution
Structured compliance evidence designed to reduce technical delays across Gulf markets.
Testing Workflow
A Clear Route from Product Review to Technical Report
A structured workflow keeps standards, samples, testing and documentation aligned throughout the project.
Product and Requirement Review
We review module construction, operating mode, ratings, intended application and target market.
Test Scope and Samples
Applicable methods, sample quantities, documentation and testing sequence are confirmed.
Laboratory Evaluation
Electrical, thermal, mechanical, photometric and material tests are performed under controlled conditions.
Reporting and Compliance Support
Clear findings and technical reports are issued to support certification and corrective action.
Key Technical Areas
Testing Evidence That Supports Safer Product Integration
The final programme is selected according to the LED module type, construction, control method, intended luminaire and regulatory objective.
IEC 62031:2018
General and safety requirements for LED modules used in general lighting.
LM 79 Parameters
Photometric and electrical measurements including flux, efficacy, CCT, CRI and distribution.
Insulation and Dielectric
Assessment of insulation integrity and protection against electric shock.
Thermal Management
Temperature stability at critical locations during normal and abnormal operation.
Flammability
Material behaviour, glow wire testing and resistance to ignition or fire propagation.
Optical Safety
Review of potential photobiological hazards where required by the product and application.
Why METS Laboratory LLC
Technical Expertise for Faster and More Confident Compliance
Independent testing, recognised reports and practical regulatory support help reduce uncertainty during product development and market entry.
speed
Fast Turnaround
Efficient project planning designed to reduce unnecessary delays in your certification timeline.
engineering
Technical Expertise
Experienced engineers supporting safety, performance, lighting and regulatory testing requirements.
public
GCC Market Access
Testing support for G Mark, ECAS, EQM, ADQCC and applicable regional pathways.
verified
ISO/IEC 17025 Accredited
Internationally recognised laboratory competence and traceable technical reporting.
