Cranes and Lifting Gear
Thorough examinations and load testing
Safety Inspection
Safety Inspection Services
Safer Facilities. Stronger Compliance.
Initial and in service safety inspections for lifting equipment, electrical systems, critical utilities, life safety assets, and specialised facility equipment across the UAE.
Independent reporting
On site UAE coverage
Digital asset records
Safety Inspection Control Centre
Inspection Ready
Asset Status
Unified Visibility
Independent Technical Review
Clear findings and corrective actions
Service Mode
On Site
Reporting
Digital
Lifts and Escalators
Brakes, governors, and emergency systems
Electrical Systems
Distribution, wiring, and thermography
Fall Protection
Harnesses, lanyards, and anchors
Total Safety Assurance
One Inspection Partner for Critical Facility Assets
METS Lab brings lifting, electrical, mechanical, access, life safety, and leisure facility inspections into one coordinated programme.
Our inspection approach helps facility managers identify defects, plan corrective actions, maintain inspection records, and prepare for authority or client audits.
Consolidated asset inspection
Risk based scheduling
Clear technical reports
Inspection reminders
Facility Safety Map
Live Asset OverviewLifting Equipment
Cranes, hoists, slings, and accessories
Electrical Distribution
Switchboards, transformers, and fixed wiring
Building Access
BMUs, cradles, monorails, and wire ropes
Life Safety Systems
Fire protection, emergency systems, and safety assets
Unified Inspection Records
Asset history, findings, corrective actions, and inspection due dates
Our Safety Inspection Services
Comprehensive Coverage Across Your Facility
Inspection solutions for critical assets, operational systems, workplace safety equipment, and specialised facility installations.
Lifting and Vertical Transport
Thorough examinations for equipment used to lift people, materials, and suspended loads.
✓ Cranes, hoists, and lifting accessories
✓ Lifts, elevators, and escalators
✓ Proof load and functional testing
Electrical Safety and Distribution
Inspection and diagnostic assessment of fixed electrical installations and distribution equipment.
✓ Switchboards and transformers
✓ Fixed wiring and earthing systems
✓ Thermographic inspection support
Mechanical and Critical Utilities
Safety checks for equipment that supports essential facility operation and emergency readiness.
✓ Generators and associated systems
✓ Fire pumps and critical utilities
✓ Mechanical condition assessment
Building Access Systems
Inspection of access equipment used for façade maintenance and work at height.
✓ Building maintenance units
✓ Suspended cradles and monorails
✓ Wire ropes and load testing
Life Safety and Fall Protection
Inspection of personal and collective protection equipment used to prevent fall related injuries.
✓ Harnesses and lanyards
✓ Anchor points and lifelines
✓ Fall arrest equipment and PPE
Swimming Pool and Leisure Safety
Focused safety checks for electrical and physical hazards in leisure facilities.
✓ Underwater lighting and earthing
✓ Entrapment hazard assessment
✓ Rescue and safety equipment
Inspection Coverage
Technical Evaluation Where Risk Matters Most
Combining visual inspection, functional checks, diagnostic tools, and documented technical assessment.
Thorough Examination and Load Testing
Structured inspection for lifting equipment, access systems, and load bearing components, with attention to wear, deformation, safety devices, structural condition, and rated capacity.
✓ Proof load testing
✓ Wire rope inspection
✓ Brake and governor checks
✓ Safety device verification
✓ Structural condition review
✓ Identification and labelling
Electrical and Diagnostic Inspection
Inspection of electrical systems, fixed installations, and critical equipment using suitable test instruments and condition monitoring techniques.
✓ Insulation and continuity checks
✓ Earthing assessment
✓ Distribution board inspection
✓ Thermographic scanning
✓ Functional safety checks
✓ Defect classification
Our Inspection Process
A Clear Journey from Asset Review to Compliance Action
Each inspection follows a structured process designed to produce useful findings, traceable records, and practical next steps.
Scope and Asset Review
We confirm equipment categories, locations, inspection history, operational conditions, and applicable requirements.
On Site Inspection
Qualified personnel conduct visual, functional, mechanical, electrical, or load related checks as required.
Technical Assessment
Findings are reviewed, defects are classified, and corrective actions are prioritised according to risk.
Reporting and Follow Up
Inspection reports, asset status, due dates, and recommended actions are issued for compliance management.
Annual Safety Compliance Calendar
Plan Inspections Before They Become Overdue
Typical inspection intervals and common reference frameworks used to build a facility specific compliance schedule.
| Asset Category | Inspection Scope | Typical Frequency | Common Reference |
|---|---|---|---|
| Lifting Equipment | Cranes, hoists, slings, and lifting gear | 6 to 12 months | LOLER, OSHA, Dubai Municipality |
| Vertical Transit | Lifts, elevators, and escalators | 6 months | EN 81, UAE Civil Defence |
| Building Access | BMUs, cradles, and monorails | 6 months | BS 6037, Dubai Municipality |
| Life Safety | PPE, harnesses, and fall arrest systems | 6 months | EN 365, ANSI |
| Electrical Systems | Fixed wiring and electrical installations | Annual or risk based | BS 7671, DEWA, ADDC |
| Portable Equipment | Portable appliance safety testing | Annual | IET Code of Practice |
| Power Utilities | Generators and fire pumps | Quarterly or annual | NFPA 110, NFPA 20 |
| Leisure Facilities | Swimming pool electrical and safety checks | Annual | Dubai Municipality Health and Safety |
Why Choose METS Lab
Independent Inspection with Practical Facility Support
One coordinated service for diverse safety assets, supported by suitable diagnostic tools, technical reporting, and planned inspection schedules.
Plan Your Inspection ProgrammeComprehensive Scope
One partner for lifting equipment, electrical systems, access equipment, PPE, utilities, and leisure facilities.
Third Party Integrity
Independent inspection and clear reporting designed to support internal and external compliance review.
Advanced Diagnostics
Ultrasonic, thermographic, measurement, and condition assessment tools selected for the inspection scope.
Digital Asset Management
Inspection history, due dates, findings, and reminders organised into a unified asset record.
